Various claims

[Wollibeebee]

Ah, I understand what you mean by textures in that sense.

My mate just drove by and picked me up, so now I'm at his house; playing minecraft... Oops. I'll try to get the carpets done later anyway.

[Scamp]

Ah. Language barrier ftw, I guess.

As long as we get fancy rugs I don't care where they come from. It's been a while since I worked with TR assets, remember?

[SamirA]

How could I forget? lol

If we had no other options I might have been ok with them. We do, however, so let us avoid them.

[Tarius]

I will review the stuff on here soon I promise. RL came about and people are trying to take my money despite the fact I paid them before the due date!

[Wollibeebee]

https://dl.dropboxusercontent.com/u/236 ... 20Cloth.7z
drums and cloth bolts.

https://dl.dropboxusercontent.com/u/236 ... l_rope.ESP
that rope coil.

working on rich rugs noa.

[Tarius]

Alright, lets see.

First, double check on the stencils when you finish a mesh.
pc_anv_door_01
This needs UV work just to make it look better. However, its fine for now.

pc_ex_anv_trap
Needs UV work. Come on, think of how the wood grain in a door in real life looks.
pc_ex_cranel01
The crane wheel thing has a couple inside out polys.
pc_ex_cranel02
pc_ex_cranel03
These cranes need collision.

pc_furn_planter2
needs collision

pc_in_anv_trap
This needs the UV work same as the other trapdoor and I think you will see that the collision is borked.

pc_scampfern
This needs the proper texture path, dont know what texture it was supposed to use?
Not a priority, but will need tidying on polys at leaf ends.

Alright, heres the link.
Stuff in the finished folder is ready to go.
Stuff in the strategic rework folder lets have another go at it.
https://dl.dropboxusercontent.com/u/220 ... uff427.zip

[SamirA]

If the stuff in finished is what you need wolli I can go ahead and do an update for you.

[Scamp]

The texture on my fern really depends on where it will be used. The included textures where merely for showing it off. I think it might be placed around the West Weald, so the fern_green.dds would be fine for now until I make a better replacement.

[Wollibeebee]

Let me finish this last few models this week, then we can update before the weekend.

[Wollibeebee]

pc_ex_cranel01
The crane wheel thing has a couple inside out polys.
pc_ex_cranel02
pc_ex_cranel03
These cranes need collision.

pc_furn_planter2
needs collision

pc_in_anv_trap
This needs the UV work same as the other trapdoor and I think you will see that the collision is borked.

pc_scampfern
This needs the proper texture path, dont know what texture it was supposed to use?
Not a priority, but will need tidying on polys at leaf ends.

https://dl.dropboxusercontent.com/u/236 ... v_trap.nif
Here is the top trap. https://dl.dropboxusercontent.com/u/236 ... v_trap.nif

Where are the inside-out pollies?

I still can't properly do collisions, nor do I care to learn further.

I don't have anything to do with Scamps fern.

I'll do the inside trap later, I just want to get the Anvil exterior finished, k. I need this update as soon as possible.

[Tarius]

OMG wolli, collisions are about the easiest thing you can do! You just follow the structure of the mesh with blank blocks. There isnt much learning to do here. All you mostly gotta do is make sure the collision isnt poking out much in any spot or isnt missing too much in one spot(you wouldnt use a cube as collision to a cylinder, you would use a shape that is closer with more sides), make sure its not blocking people or possibly projectiles, and just make sure its not very many polys. I mean darn, this isnt rocket surgery.

And I will look at these today. Been busy lately with electronics, new computer etc.(I shutter at the thought of having to go through my MW files as I have over 300 plus mods(textures included) added through wrye mash and a bunch of backlog to go through)

The missing polys are on the wheel near the top.

Dont worry about the fern, its ok for now.

Ok, go with that(the trap door), its fine. But darn we need a new metal texture at some point.
Wolli, you posted the same link twice.

[Wollibeebee]

Alright, sounds simple enough, I was except some other method (NCA to the NiTriShape with the NiHiFlapOfSking then multiply by 00000000.000101010110)

My brother just spent the entire morning vacuuming his new gaming computer. Kinda comical: he hates vacuuming.

Right, I'll get them seen too, I just couldn't find them from looking at the entire mesh.

I purposely posted the same link twice. *Holds up spork*

[Tarius]

Alright, sounds simple enough, I was except some other method (NCA to the NiTriShape with the NiHiFlapOfSking then multiply by 00000000.000101010110)

My brother just spent the entire morning vacuuming his new gaming computer. Kinda comical: he hates vacuuming.

Right, I'll get them seen too, I just couldn't find them from looking at the entire mesh.

I purposely posted the same link twice. *Holds up spork*

Vacuuming a new computer?

[SGMonkey]

Worst idea ever. Static discharge anyone?

Tell your brother to use compressed air.

[Tarius]

Worst idea ever. Static discharge anyone?

Tell your brother to use compressed air.

Indeed. I am glad I have an unlimited supply of compressed air. I blow out my computer every couple months. And yes, it does make a big difference.
5 years ago my brother and I each got the exact same computer. I did regular maintaince on mine by basically blowing it out, he didnt. His is basically dead now and mine still runs well. I finally got the chance to look inside to see what sort of damage may have happened. Well, it was obvious once I saw the cake of dust in the vents that had to be cutting the air flow by at least 50%. Basically his computer probably just overheated to death while I never let the temps on ine get above 75C.

[Wollibeebee]

well, "lol"

https://dl.dropboxusercontent.com/u/236 ... anel01.nif
Anyway, here's the crane that had the inversed faces. I'll do all those collisions as soon as possible, but they're not really pressing enough to me at the moment as I don't need them to finish Anvil. Let's just do this update now.

I'm really running out of enthusiasm and steam, so I'd just like to quickly get back to Anvil before I turn into one of those losers that runs away without explanation.

[SamirA]

I'll update as soon as Tarius sends me the approved files and you can knock Anvil out and take a deserved rest.

[Tarius]

Crane looks fine.
https://www.dropbox.com/s/ln05xov9wvryw ... anel01.nif

Ok, I guess thats it for now, do an update, etc etc.

[SamirA]

I am adding all of the stuff that is ready and the two new ones that were just ok'd after Tarius' post, the other 4 are still out. Do we want the edited Anvil walls done by SG in as well? Also the ayleid crystal stuff is being added.

[Rattfink333]

this is the cellar piece in need to finish the alchemists